Rev. 2026.11  /  Trade licensing referenceLast checked 2026-11-18
Electrician · WA

Washington electrician licensing

The state issues the credential, and the board named below sets the hours, the exam and the renewal rule. Here is how Washington structures it.

State-issuedChecked 2026-11-18
Issuing authority

Washington State Department of Labor & Industries (L&I) — Electrical Program

Open the board's site →

WAStatewide credential3 tiers

Each tier, and what it costs you in hours

The single most common reason an application is rejected is a mismatch between the hours you can document and the hours the board counts. Read this column first.

Washington — electrician tiers
TierExperience requirementExam
Electrical traineeA trainee certificate is required before any work in the trade; it is renewed every two years, and 24 hours of approved classroom instruction is required per 2,000 hours of experience.None — training certificate only.
Journey level (01)8,000 hours of supervised experience, at least 4,000 of which must be commercial or industrial installations, plus 96 hours of basic classroom instruction. After June 30, 2026, a registered apprenticeship or equivalent becomes the only qualifying route.L&I certificate of competency examination (open book).
Specialty certificatesMost specialties (residential, HVAC/refrigeration, sign installer) require 4,000 hours in that specialty; a few require 2,000.Specialty examination, scoped to that specialty only.

Renewal

24 hours of approved continuing education, including 8 hours of code update and 4 hours of RCW/WAC, before each renewal; you can renew into inactive status while not working in Washington.

If you are coming from another state

Out-of-state electricians apply for examination with signed proof of 8,000 supervised hours (4,000 commercial/industrial), 96 hours of classroom code training, and documentation from the licensing state. Distance learning does not satisfy the classroom requirement.

Before you pay anything

Ask the board in writing whether your out-of-state hours count, and in what breakdown. A verbal answer from a clerk is not the record you will rely on if an application is denied.

State-specific details worth knowing

01

Washington certifies individuals, not just contractors — working in the trade without an L&I certificate, trainee card included, is a violation in itself.

02

The practical-experience route for journey level closes after June 30, 2026: from then on, a registered apprenticeship or equivalent is the only path.

03

Hours must be documented by the employer. Undocumented work does not count, however real it was.

Next steps

Disclaimer

This page records what the board publishes. It is not legal advice, and it is not a substitute for the board's current application instructions — fees and hour thresholds change by rule.