Oregon electrician licensing
The state issues the credential, and the board named below sets the hours, the exam and the renewal rule. Here is how Oregon structures it.
Oregon Building Codes Division (BCD), Department of Consumer and Business Services
Each tier, and what it costs you in hours
The single most common reason an application is rejected is a mismatch between the hours you can document and the hours the board counts. Read this column first.
| Tier | Experience requirement | Exam |
|---|---|---|
| General Journeyman (J) | At least 8,000 hours of electrical work experience, including not fewer than 1,000 hours wiring single- or multifamily dwellings (ORS 479.630). Equivalent-experience applicants document hours by work category and submit transcripts for the related training classes (OAR 918-282-0170). | Examination prepared by the Electrical and Elevator Board and administered by BCD: 52 questions, 3 hours, open book, 75 to pass. |
| General Supervising Electrician (S) | The supervising credential — what a journeyman works under and what qualifies an electrical contractor. Additional experience and supervision requirements are set by BCD rule. | Supervising-level examination. |
| Limited Residential | Two years of residential apprenticeship or trainee experience plus the safety and theory training required of apprentices; scope limited to single and multifamily dwellings not more than three floors above grade (ORS 479.630). | BCD residential examination. |
| Limited Journeyman Manufacturing Plant | 8,000 hours documented in the categories set out in OAR 918-282-0190, limited to the employer's own operable plant; repair and maintenance only where no supervising electrician or engineer is employed. | BCD examination for the class. |
Renewal
Renewal runs on BCD's cycle and carries continuing education; the current cycle length, hour count and code edition are printed on the license page rather than fixed in statute.
If you are coming from another state
Oregon licenses reciprocally with a short list of states — Washington most visibly, under a standing agreement between BCD and L&I — and accepts out-of-state examination scores only where an agreement says so. Otherwise you qualify through hours and sit the Oregon examination.
Ask the board in writing whether your out-of-state hours count, and in what breakdown. A verbal answer from a clerk is not the record you will rely on if an application is denied.
State-specific details worth knowing
Oregon licenses the person and the contractor separately: a journeyman works under a supervising electrician, and only a licensed electrical contractor may contract for the work.
The 8,000 hours are not a flat number — 1,000 of them must be dwelling-unit wiring, which is the requirement out-of-state applicants most often fail to document.
There are several limited journeyman classes (residential, manufacturing plant, sign, low voltage) with separate scopes; holding one does not authorize the others.
Next steps
- Add up your documented hours before you request an application.
- Check what your current tier legally allows.
- Understand what transfers — and what restarts.
- Confirm the current fee and rule on the board page.
This page records what the board publishes. It is not legal advice, and it is not a substitute for the board's current application instructions — fees and hour thresholds change by rule.